Starlink for Vacation Rentals, Airbnb Properties, and Guest Cabins

Use a documented guest-network arrangement that isolates private devices. Keep cameras, management pages and owner storage on the appropriate private network. Verify isolation with a test guest device before handing out credentials.

Wi-Fi network: [Guest network name]

Password: [Guest password]

If connection fails: Check that you selected this network, then try another website. Tell us whether one device or all devices are affected.

Help: [Owner or manager contact]

Please leave equipment connected: Contact us before moving or resetting the router.

Only include guest information. Never put Starlink account or router-administrator credentials on the card.

Check the router's power, cable and ventilation; verify a real browsing or streaming task in the guest area; confirm the card is correct; inspect for moved equipment. Recheck private-device isolation after network changes. For separate cabins, test the building link as well as each cabin's Wi-Fi.

Keep a local contact who can inspect equipment safely. Remote controls depending on the failed internet link may be unreachable during an outage. Decide how you will communicate with guests and what alternative connectivity, if any, is available.

Record the exact status and affected locations before resetting. If only one cabin is affected, start with its power, building link and access point. If all units fail, check the main service and shared network equipment.

Use the guest-network guide for configuration and the building-link guide for coverage design. Avoid promising uninterrupted service based on a single check between bookings.

• How to Create a Guest Wi-Fi Network for Visitors or Customers
• How to Extend Starlink Wi-Fi to a Garage, Barn, or Workshop